Price : $14.99
List Price :
You Save : $20.00 (57%)
Product Description
Amazon.com Product Description
The weather-resistant GE 45132 Selection Alert Wireless Motion Sensor detects movement inside a 110-degree location from up to 40 feet away. Good for monitoring activity in and around your property, such as in the garage, backyard, hallways, shed, living area, or entry area, the Motion Sensor is very easy to install anywhere with no drilling necessary. And with wireless operation, the sensor is powered by a single nine-volt battery (not included) that will final up to nine months.
The GE 45132 Option Alert Motion Sensor:
- Functions indoors or out
- Installs in minutes without having wires
- Provides 110-degree coverage with a 40-foot range
- Communicates with the Wireless Control Center from up to 150 feet away
A climate-resistant, wireless design lets you intall the Choice Alert motion sensor anywhere. .Note: This sensor should be put to use with the GE 45129 Wireless Control Center or with the GE 45142 Wireless Manage Center Starter Kit (every sold separately). The GE 45132 Motion Sensor can work alongside other wireless Choice Alert components as component of a GE Option Alert Wireless Alarm Program.
Component of the GE Option Alert Wireless Alarm SystemThe GE 45132 Motion Sensor is part of the GE Option Alert Wireless Alarm Method line of solutions. Expense-effective and very easy to install, Option Alert components give wireless operation, multi-zone coverage, home and away settings, all-weather function, and expandability for total home protection.
With wireless capabilities, Choice Alert products require no difficult wiring, drilling or expensive installation fees. And given that they are created to be component of a self-contained technique, there are no monthly usage charges. Program components are rather simple sufficient for any individual to use, and can be combined to deliver a customized blanket of protection over your entire property.
Wireless Control Center for Sensor MonitoringThe entire Choice Alert Safety Program is created about the Wireless Control Center, the system's hub. The Control Center monitors every single and just about every sensor that is wirelessly connected to it. As a lot of as 4 sensors can be programmed in every single of 4 zones, giving you the security of up to 16 sensors to guard your entire home, such as sensors for doors, windows, gates, water leaks, and motion detection.
The Wireless Manage Center makes it possible for you to secure your method with a custom 4-digit code that can be altered at any time. Plus, the center lets you control lots of program characteristics. For example, you can choose 'Home' mode for an instant alarm and 'Away' mode for a delayed alarm. In addition to the armed alarm program, the Manage Center also provides a visible and audible Zone Notification alert program (with a selection of continuous alert or single chime mode) and a dedicated alert zone (Zone four). The center wirelessly transmits and receives signals up to 150 feet.
Additionally, the Wireless Control Center capabilities a low-battery indicator that will alert you when battery power is low in a distinct zone, so you'll know precisely when to replace the batteries in just about every 1 of your components.
Mix Components for Total Home CoverageTo complement the Motion Sensor, there are a variety of components readily available for use with the Wireless Control Center, which includes a door/window sensor, a water leak detector, a secondary audio alarm siren, a signal repeater (for enhanced wireless range), a garage door sensor, and a Silent Alert LED indicator. Add up to 16 sensors and give your self the peace of thoughts that only total house protection can deliver.
All-Weather Motion Sensor Installs AnywhereThe versatile GE 45132 Option Alert Motion Sensor can be installed anywhere, inside or out. Its weather-resistant style allows the sensor to function in most climate conditions, and its ball-joint head swivels to allow ample coverage. The sensor covers a wide, 110-degree area at a range of up to 40 feet, so it really is best for living rooms, dining rooms, hallways, garages or backyards. And, the 45132 can be mounted up to 150 feet away from the Wireless Control Center (not included). It desires no wiring or electrical energy for operation, operating off a single nine-volt battery (not included).
The Choice Alert Motion Sensor operates with any of the Wireless Manage Center's 4 zones. When the Motion Sensor is paired with Zones 1, Two, or Three, the Wireless Manage Center will emit a loud alarm that lets you know motion has been detected in 'Away' mode only. The Motion Sensor will not activate an alarm in 'Home' mode, so you can move freely about the property when the system is armed. Alternatively, when the Motion Sensor is paired with Zone 4 (the dedicated alert zone) on the Wireless Control Center, a continuous alert will notify you of motion in a precise region.
The GE 45132 Choice Alert Motion Sensor is backed by a one particular-year restricted warranty.
What's in the BoxGE 45132 Motion Sensor with mounting bracket, two screws, two plastic anchors, and ball-head joint.
GE 45132 Choice Alert Wireless Motion Sensor
See all Product Description
Buyer Reviews
First of all, to use this you desire a Manage Center GE 45129 Selection-Alert Wireless Manage Center.
A handful of points to note that had been not apparent until I bought this and a Control Center:
- the motion sensor can connect to the Control Center in two ways, either in 1 of the first three Zones (1, 2, 3) or in the fourth Zone (4) and the Manage Center has a unique behavior in these two categories.
- In Zone 1, 2, or three: the motion sensor can only operate in Alarm mode, not in Monitoring mode. Other sensors apparently can be setup to either Alert, Chime, or just show an indicator light for its assigned Zone based on a switch on the Control Center (the switch has settings of Alert / Chime / Off) this setting is applicable when the Control Center is disarmed (not in AWAY or Home alarm mode). But the Motion Sensor DOES NOT perform in this way - it ONLY Functions in AWAY or Property alarm mode, when assigned to Zone 1, two or three.
- When assigned to Zone four: the motion sensor triggers an Alert only, which ignores the Alert / Chime / Off switch. The Alert can not be silenced, only muted once it starts.
Due to the fact the alarm is overkill for what we want (monitoring our sleepwalking child), we plan on keeping it in Zone 4, and unplugging the Control Center with out batteries in it to shut if off throughout the day. The Alert itself really should be enough to wake us up.
this motion detector operates genuinely properly at detecting any motion but then does not set off the alarm for about 30 seconds, all the when beeping as if to give an intruder directions to the residence unit so he can destroy it just before the alarm essentially sounds. the time amongst activation of the motion detector and the alarm demands to be shortened.
Related Product
No comments:
Post a Comment